S2 Floor.
A narrow-body floor-standing refill station for open interiors where a wall mount won't work. Stainless housing, sensor-only activation, hermetic Danfu compressor.
From CA$2,199 outright · or CA$109/mo on the 24-month installment plan
Five numbers from the S2 sheet.
Each frame is a published spec, not a marketing claim. Tap a dot or let the reel walk through them.
Narrow-body footprint at 210 mm.
Built for sites where a wall mount isn't an option but circulation is tight. The body sits flush against partition walls without commanding the space.
Anatomy.
The S2 layered into its named pieces. Floor format, narrow envelope, sensor-only activation — the contractor view of the freestanding unit.
Envelope.
210 × 504 × 1169 mm overall. Narrow front, deep enough to house the cooling stack and feed line. Designed to disappear against a partition or stand independently in an open plan.
Operating conditions.
Built for open-plan refill traffic. The S2 works where a wall mount won't — gym floors, lobbies, transit concourses, modular interiors that move every season.
Steady 30 L/hr through ambient swings. Force-cooling output stays at 30 L/hr across the 5–38 °C ambient operating range. Recovery is constant whether the room is cold or the HVAC has been off all weekend.
held flat across the full ambient range:
Sensor-only, no manual layer. Single touchless faucet for refill. The S2 doesn't try to also be a drinking fountain — fewer wear points, smaller service surface, narrower body.
sensor faucet
no push pads
The S2 ships with one touchless activation point. No drinking-fountain layer, no push-button stack — fewer wear points, smaller service surface, narrower body.
Sealed cooling, low service touch. The hermetic Danfu compressor runs sealed. No refrigerant top-up cycle on the consumer side. Service is mostly external — wipe-down, sensor calibration, pressure-reducing valve check.
Sealed inside, accessible outside.
- Hermetic Danfu compressor
- Refrigerant circuit
- Cooling stack
- Wipe-down surfaces
- Sensor calibration
- PRV check
From the published sheet.
Four numbers worth highlighting. Every value comes from the S2 product sheet, with the same separation between facts and assumptions as the rest of the page.
Cold output at 8–12 °C.
Force cooling power.
Reservoir capacity.
Narrow-body footprint.
Site requirements.
Floor planning, utilities, ADA, service, and delivery for a freestanding unit — answered against the published S2 sheet, not interpreted from marketing copy.
Slab planning, then finish.
The narrow body still needs slab or floor coordination, clear service access, and a clean drain path. Best fit before the floor finish locks the location in.
The complete spec.
Configuration, utilities, and performance — the full numeric body of the PT-1358 / FLOOR sheet, in one place.
Floor planning
The narrow body still needs slab or floor coordination, clear service access, and a clean drain path.
Utilities at site
City water, power, and the included pressure-reducing valve need to align before the floor finish locks the location.
Best install fit
Useful for open-plan interiors, fitness spaces, and sites where a wall-mount location is unavailable or undesirable.
Procurement note · The S2 sheet references filtration without listing media, certification, or capacity; the published numeric specs stay separated from install assumptions.
How orders move.
Six operating commitments behind every quote — what the desk replies to, what the SLA is, and what ships with the unit.
- Send building type, quantity, and rough-in. We reply within two business days with the matching model, current timing, and any open site questions — before any deposit is requested.
- Stelys is operated out of Canada, with Canada-wide service and CAD pricing. The team that quotes is the team that ships. No reseller layer between you and the part you ordered.
- The S1 sheet keeps dimensions, utilities, and performance in a single document. The page ships with the order so the contractor and the AHJ are reading the same file you are.
- 37-callout mechanical map, rough-in figure with utility envelope, install figure series, and a service path that names every replaceable component. Less mystery, fewer site change orders.
- Mounting type, water pressure, voltage, and access constraints get reviewed before the quote is final. The plumber walks into a clean job, not a discovery exercise.
- Quote review responses go out within two business days — not a marketing promise, an SLA the desk is staffed to meet. If we miss it, you'll have a reason in the same window.
Footprint, in numbers.
Per active user. Across a 500-person school, that's ~120,000 bottles a year.
No painted steel where the water lands. Cleanable, repaintable, recyclable at end of life.
Quotes, replies, and replacement parts originate from inside Canada — short shipping arcs.
Operating principles.
Less plastic, by design.
Refill at scale displaces single-use bottles. Stelys is not a sustainability brand — it's a building product whose use generates that outcome anyway.
Learn moreEvery part is a named part.
If the manual doesn't name it, we don't ship it. The PT-1359 manual is the contract for what's serviceable, what's structural, and what's optional.
Learn moreDesigned to ADA geometry.
S1 Wall is built to ADA-compliant geometry. Compliance is finalized at install — height, clearances, and approach are owned by the people on site.
Learn more
Start a quote review.
Send the building type, likely quantity, and any rough-in or access notes. We reply within two business days with the matching model, current timing, and the site questions that still need an answer before the order gets written.
If you already know water pressure, power constraints, mounting preference, or delivery timing — include it. The first reply will be sharper for it.